Error: Failed to Start Device Controller for printer-driven cash drawer connected to an Epson printer


Summary:

Failed to Start Device Controller errors for Epson printer-driven cash drawers in New Device Framework when both the printer and drawer are defined in OPOS setup and in Counterpoint. 

Cause:

This is typically a problem with the Output Interval Time setting on the OPOS device (in this case the cash drawer) not matching it’s counterpart device (in this case the printer) in the OPOS setup utility on the workstation or terminal server. 

Solution:

This problem can be identified if the drawer is removed from Setup / Point of Sale / Devices and the printer still tests successfully. If the drawer is added back as a device by itself in Counterpoint, it will function successfully.

If the printer is then added in Setup / Point of Sale / Devices, the error will be displayed for the printer, which was the last device added.

If each device can connect without error when installed independently of the other - this indicates the output interval time does not match between the two devices as Counterpoint can only communicate with the first device added in the software.

Both printer and cash drawer should now be able to be defined in Setup / Point of Sale / Devices and test without error.

 



Article ID: 937
Created: April 1, 2016
Last Updated: April 4, 2016

Online URL: https://counterpoint.knowledgebase.co/article.php?id=937